{"id":3544,"date":"2024-11-02T08:49:08","date_gmt":"2024-11-02T07:49:08","guid":{"rendered":"https:\/\/www.torbox.ch\/?page_id=3544"},"modified":"2026-04-04T03:24:27","modified_gmt":"2026-04-04T02:24:27","slug":"torbox-mini","status":"publish","type":"page","link":"https:\/\/www.torbox.ch\/?page_id=3544","title":{"rendered":"Installation &#8211; TorBox mini"},"content":{"rendered":"\n<p>Sometimes, a TorBox on a&nbsp;<a href=\"https:\/\/www.raspberrypi.org\/products\/raspberry-pi-3-model-b-plus\/\" target=\"_blank\">Raspberry Pi 3 Model B+<\/a>, a&nbsp;<a href=\"https:\/\/www.raspberrypi.org\/products\/raspberry-pi-4-model-b\/\" target=\"_blank\">Raspberry Pi 4 Model B,<\/a>&nbsp;or a&nbsp;<a href=\"https:\/\/www.raspberrypi.com\/news\/introducing-raspberry-pi-5\/\" target=\"_blank\">Raspberry Pi 5<\/a>&nbsp;is too big or expensive to use, and a&nbsp;TorBox on a cloud&nbsp;is not a feasible solution. Wouldn&#8217;t it be nice if TorBox were smaller and stealthier? That&#8217;s precisely the aim of the TorBox mini.<\/p>\n\n\n\n<p>For TorBox mini, we need the following:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>A <a href=\"https:\/\/www.raspberrypi.com\/products\/raspberry-pi-zero-2-w\/\">Raspberry Pi&nbsp;Zero&nbsp;2&nbsp;W<\/a> with an SD Card (at least 16 GB)<\/li>\n\n\n\n<li>An USB-A adapter for the Raspberry Pi Zero 2 W (some solderless options: <a href=\"https:\/\/geekworm.com\/collections\/raspberry-pi\/products\/raspberry-pi-zero-w-badusb-usb-a-addon-board-usb-connector-case-kit\">here<\/a>, <a href=\"https:\/\/www.aliexpress.com\/item\/32846959589.html\">here<\/a> or <a href=\"https:\/\/www.tindie.com\/products\/8086net\/solderless-zero-dongle-for-raspberry-pi-zero\/\">here<\/a>) or a <a href=\"https:\/\/www.delock.com\/produkt\/85272\/merkmale.html\">Micro-USB male to USB-A male cable<\/a>.<\/li>\n\n\n\n<li>RNDIS\/Ethernet Gadget support for the machine you want to plug in the Raspberry Pi Zero 2 W with the TorBox mini configuration. For more information, see further below.<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><a href=\"https:\/\/www.torbox.ch\/wp-content\/uploads\/2024\/01\/TorBox_mini-001-e1705549291779.png\"><img loading=\"lazy\" decoding=\"async\" width=\"760\" height=\"570\" src=\"https:\/\/www.torbox.ch\/wp-content\/uploads\/2024\/01\/TorBox_mini-001-e1705549291779.png\" alt=\"Solderless USB-A adapters mounted on Raspberry Pi Zero W\" class=\"wp-image-3549\"\/><\/a><figcaption class=\"wp-element-caption\">Solderless USB-A adapters mounted on Raspberry Pi Zero W<\/figcaption><\/figure>\n<\/div>\n\n\n<p>There are two different ways to create an SD Card with TorBox mini for a Raspberry Pi&nbsp;Zero&nbsp;2&nbsp;W:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><a href=\"https:\/\/www.torbox.ch\/?page_id=3544#image_raspi\">Using our image file (this is the recommended default way)<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.torbox.ch\/?page_id=3544#script\">Using our installation script<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.torbox.ch\/?page_id=3544#gadget\">Addendum: How to install RNDIS\/Ethernet Gadget support?<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.torbox.ch\/?page_id=3544#dhcp\">Addendum: What can I do, if DHCP doesn&#8217;t configure my RNDIS\/Ethernet Gadget?<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.torbox.ch\/?page_id=3544#unstable\">Addendum: Fix for unstable SSH client connections<\/a><\/li>\n<\/ul>\n\n\n\n<h1><p style=\"text-align: center;\">\u2022 \u2022 \u2022<\/p><\/h1>\n\n\n\n<h5 class=\"wp-block-heading\" id=\"image_raspi\">Using our image file (recommended)<\/h5>\n\n\n\n<p>This is the recommended and probably easiest way to install TorBox mini on a Raspberry Pi&nbsp;Zero&nbsp;2&nbsp;W:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><a href=\"https:\/\/www.torbox.ch\/data\/torbox-mini-20260322-v055.img.xz\">Download the latest TorBox mini image file<\/a>\u00a0(<strong>TorBox v.0.5.5\u00a0<\/strong>based on\u00a0<a href=\"https:\/\/www.raspberrypi.com\/software\/operating-systems\/#raspberry-pi-os-64-bit\" target=\"_blank\" rel=\"noreferrer noopener\">Raspberry Pi OS \u201cTrixie\u201d lite 64bit<\/a>\u00a0with the\u00a0<a href=\"https:\/\/kernelnewbies.org\/Linux_6.12\" target=\"_blank\" rel=\"noreferrer noopener\">Linux Kernel 6.12.75<\/a>\u00a0and\u00a0<a href=\"https:\/\/gitlab.torproject.org\/tpo\/core\/tor\/-\/raw\/release-0.4.8\/ReleaseNotes\" target=\"_blank\" rel=\"noreferrer noopener\">Tor version 0.4.9.5<\/a>\u00a0with\u00a0<a href=\"https:\/\/salsa.debian.org\/pkg-privacy-team\/obfs4proxy\/-\/blob\/master\/ChangeLog\" target=\"_blank\" rel=\"noreferrer noopener\">obfs4proxy version 0.0.14<\/a>\u00a0and\u00a0<a href=\"https:\/\/gitlab.torproject.org\/tpo\/anti-censorship\/pluggable-transports\/snowflake\/-\/blob\/main\/ChangeLog\">Snowflake 2.12.1<\/a>; ~1 GB) and\u00a0<a href=\"https:\/\/www.torbox.ch\/?page_id=1128\" target=\"_blank\" rel=\"noreferrer noopener\">verify the integrity of the downloaded file.<\/a><\/li>\n\n\n\n<li>Transfer the downloaded image file to an\u00a0<a href=\"https:\/\/en.wikipedia.org\/wiki\/Secure_Digital\" target=\"_blank\">SD card<\/a>, for example, with\u00a0<a href=\"https:\/\/www.balena.io\/etcher\/\" target=\"_blank\" rel=\"noreferrer noopener\">Balena Etcher<\/a> (<a href=\"https:\/\/www.perplexity.ai\/search\/how-can-i-decompress-a-xz-file-72DH3Nq1Q5quofx8wu02SQ#0\">you may need to decompress the .xz file first<\/a>) or the <a href=\"https:\/\/www.raspberrypi.com\/software\/\">Raspberry Pi Imager<\/a>. <strong>TorBox requires at least a 16 GB SD Card.<\/strong><\/li>\n\n\n\n<li>If done, insert the SD Card into the Raspberry Pi Zero 2 W, then connect it to a USB-A adapter as shown in the photo above. Plug the Raspberry Pi Zero 2 W into a USB-A connector in your client machine.<\/li>\n\n\n\n<li>As soon as the Raspberry Pi Zero 2 W gets power, the operating system on the SD Card starts to unpack the system and restart the Raspberry Pi Zero 2 W again. After 5 minutes, when the green LED stops flickering, check if the RNDIS\/Ethernet Gadget is recognised and configure it to use DHCP to get the network configuration from TorBox mini. <strong>Important: You must turn off all other network connections on your client machine to avoid interference and ensure all data is routed through the TorBox mini.<\/strong><\/li>\n\n\n\n<li>Login to the TorBox mini using a&nbsp;<a href=\"https:\/\/www.torbox.ch\/?page_id=112#which-ssh-client-do-you-prefer\" target=\"_blank\" rel=\"noreferrer noopener\">SSH client<\/a>&nbsp;(<strong>192.168.44.1<\/strong>) or a web browser (<a href=\"http:\/\/192.168.44.1\/\">http:\/\/192.168.44.1<\/a>; username:&nbsp;<strong>torbox<\/strong>&nbsp;\/ password:&nbsp;<strong>CHANGE-IT<\/strong>).<\/li>\n\n\n\n<li>After&nbsp;<a href=\"https:\/\/www.torbox.ch\/?page_id=2637\">seeing a welcome screen and answering initial questions during the first start-up<\/a>, you should see the&nbsp;<a href=\"https:\/\/www.torbox.ch\/?page_id=775\" target=\"_blank\" rel=\"noreferrer noopener\">TorBox Main Menu<\/a>. Select the preferred connection setup and&nbsp;<strong>change the default passwords as soon as possible<\/strong>&nbsp;(the associated entries are in the&nbsp;<a href=\"https:\/\/www.torbox.ch\/?page_id=875\" target=\"_blank\">configuration submenu<\/a>).<\/li>\n<\/ol>\n\n\n\n<h1><p style=\"text-align: center;\">\u2022 \u2022 \u2022<\/p><\/h1>\n\n\n\n<h5 class=\"wp-block-heading\" id=\"script\">Using our installation script<\/h5>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Download&nbsp;the latest version of <a href=\"https:\/\/www.raspberrypi.com\/software\/operating-systems\/#raspberry-pi-os-64-bit\">Raspberry Pi OS Lite (64-bit)<\/a>&nbsp;or <a href=\"https:\/\/www.raspberrypi.com\/software\/operating-systems\/\">Raspberry Pi OS Lite (32-bit)<\/a>, or use the&nbsp;<a href=\"https:\/\/github.com\/raspberrypi\/rpi-imager\/releases\" target=\"_blank\" rel=\"noreferrer noopener\">Raspberry Pi Imager<\/a>&nbsp;and choose, under Operating System, Raspberry Pi OS (other), the Raspberry Pi OS Lite (64-bit) or Raspberry Pi OS Lite (32-bit) image. <\/li>\n\n\n\n<li>If you don\u2019t use the Raspberry Pi Imager, then transfer the downloaded Raspberry Pi OS Lite image to an\u00a0<a href=\"https:\/\/en.wikipedia.org\/wiki\/Secure_Digital\" target=\"_blank\" rel=\"noreferrer noopener\">SD Card<\/a>, for example, with\u00a0<a href=\"https:\/\/www.balena.io\/etcher\/\" target=\"_blank\" rel=\"noreferrer noopener\">Etcher<\/a>.\u00a0<strong>TorBox requires at least a 16 GB SD Card.<\/strong><\/li>\n\n\n\n<li>Insert the SD Card into a\u00a0<a href=\"https:\/\/www.raspberrypi.org\/products\/raspberry-pi-3-model-b-plus\/\" target=\"_blank\"><strong>Raspberry Pi 3 Model B+<\/strong><\/a><strong>,\u00a0<\/strong><a href=\"https:\/\/www.raspberrypi.org\/products\/raspberry-pi-4-model-b\/\" target=\"_blank\"><strong>Raspberry Pi 4 Model B,<\/strong><\/a><strong>\u00a0or\u00a0<\/strong><strong><a href=\"https:\/\/www.raspberrypi.com\/news\/introducing-raspberry-pi-5\/\" target=\"_blank\" rel=\"noreferrer noopener\">Raspberry Pi 5<\/a><\/strong>. Yes, that&#8217;s correct &#8211; we have to build the SD Card for a Raspberry Pi\u00a0Zero\u00a02\u00a0W on a regular Raspberry Pi.<\/li>\n\n\n\n<li>If asked, create a user &#8220;<strong>torbox<\/strong>&#8221; and remember the chosen password for later use.<\/li>\n\n\n\n<li>Ensure stable Internet connectivity, download and execute our installation script (for options, use&nbsp;<code>--help<\/code>):<\/li>\n<\/ol>\n\n\n<div class=\"wp-block-syntaxhighlighter-code \"><pre class=\"brush: bash; title: ; notranslate\" title=\"\">\ncd\nwget https:\/\/raw.githubusercontent.com\/radio24\/TorBox\/master\/install\/run_install.sh\nchmod a+x run_install.sh  \n.\/run_install.sh --torbox_mini\n<\/pre><\/div>\n\n\n<p>The installation script supports the following options:<\/p>\n\n\n<div class=\"wp-block-syntaxhighlighter-code \"><pre class=\"brush: plain; title: ; notranslate\" title=\"\">\nSyntax : run_install.sh &#x5B;-h|--help] &#x5B;--randomize_hostname] &#x5B;--select-tor] &#x5B;--select-fork] &#x5B;--select-branch branch_name] &#x5B;--step_by_step]\nOptions: -h, --help     : Shows this help screen ;-)\n         --randomize_hostname\n                        : Randomizes the hostname to prevent ISPs to see the default\n         --select-tor   : Let select a specific tor version (default: newest stable version)\n         --select-fork fork_owner_name\n\t\t\t            : Let select a specific fork from a GitHub user (fork_owner_name)\n         --select-branch branch_name\n                        : Let select a specific TorBox branch (default: master)\n         --on_a_cloud   : Installing on a cloud or as a cloud service\n         --torbox_mini  : Installing TorBox mini on a Raspberry Pi Zero 2 W\n         --step_by_step : Executes the installation step by step\n         --continue_with_step&quot;\n                        : Continue the installation with a certain step\n<\/pre><\/div>\n\n\n<p><\/p>\n\n\n\n<ol start=\"6\" class=\"wp-block-list\">\n<li>If done, insert the SD Card into the Raspberry Pi Zero 2 W, then connect it to a USB-A adapter as shown in the photo above. Plug the Raspberry Pi Zero 2 W into a USB-A connector in your client machine.<\/li>\n\n\n\n<li>The operating system on the SD Card starts as soon as the Raspberry Pi Zero 2 W is powered on. After 3-5 minutes, when the green LED stops flickering, check whether the RNDIS\/Ethernet Gadget is recognised, and configure it to use DHCP to obtain its network configuration from TorBox mini. <strong>Important: You must turn off all other network connections on your client machine to avoid interference and ensure all data is routed through the TorBox mini.<\/strong><\/li>\n\n\n\n<li>Log in to the TorBox mini using a\u00a0<a href=\"https:\/\/www.torbox.ch\/?page_id=112#which-ssh-client-do-you-prefer\" target=\"_blank\" rel=\"noreferrer noopener\">SSH client<\/a>\u00a0(<strong>192.168.44.1<\/strong>) or a web browser (<a href=\"http:\/\/192.168.44.1\/\">http:\/\/192.168.44.1<\/a>; username:\u00a0<strong>torbox<\/strong>\u00a0\/ password:\u00a0<strong>CHANGE-IT<\/strong>).<\/li>\n\n\n\n<li>After&nbsp;<a href=\"https:\/\/www.torbox.ch\/?page_id=2637\">seeing a welcome screen and answering some initial questions during the first start-up<\/a>, you should see the&nbsp;<a href=\"https:\/\/www.torbox.ch\/?page_id=775\" target=\"_blank\" rel=\"noreferrer noopener\">TorBox Main Menu<\/a>. Select the preferred connection setup and&nbsp;<strong>change the default passwords as soon as possible<\/strong>&nbsp;(the associated entries are in the&nbsp;<a href=\"https:\/\/www.torbox.ch\/?page_id=875\" target=\"_blank\">configuration submenu<\/a>).<\/li>\n<\/ol>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><a href=\"https:\/\/www.torbox.ch\/wp-content\/uploads\/2024\/04\/IMG_8288-e1712487498369.jpg\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"768\" src=\"https:\/\/www.torbox.ch\/wp-content\/uploads\/2024\/04\/IMG_8288-1024x768.jpg\" alt=\"TorBox mini in action! It is connected via a USB-A female - USB-C male adapter to a MacBook pro.\" class=\"wp-image-3621\"\/><\/a><figcaption class=\"wp-element-caption\">TorBox mini in action! It is connected via a USB-A female &#8211; USB-C male adapter to a MacBook pro.<\/figcaption><\/figure>\n<\/div>\n\n\n<p>The TorBox mini can also be installed on a Debian-based system, such as DietPi, which may be more performant on a Raspberry Pi Zero 2 W than Raspberry Pi OS. For the installation, follow the steps above, but of course, flash a compatible Debian-based image on the SD Card instead of a Raspberry Pi image (for DietPi see <a href=\"https:\/\/dietpi.com\/docs\/hardware\/\">here<\/a>). Also, you have to use the installation script for Debian-based systems (<code>run_install_on_debian.sh<\/code>):<\/p>\n\n\n<div class=\"wp-block-syntaxhighlighter-code \"><pre class=\"brush: bash; title: ; notranslate\" title=\"\">\ncd\nwget https:\/\/raw.githubusercontent.com\/radio24\/TorBox\/master\/install\/run_install_on_debian.sh\nchmod a+x run_install_on_debian.sh  \n.\/run_install_on_debian --torbox_mini\n<\/pre><\/div>\n\n\n<p>Regarding the installation of Debian-based systems (including DietPi), please also consult the <a href=\"https:\/\/www.torbox.ch\/?page_id=1168#footnotes\">Footnotes section on our TorBox installation page<\/a>.<\/p>\n\n\n\n<h1><p style=\"text-align: center;\">\u2022 \u2022 \u2022<\/p><\/h1>\n\n\n\n<h5 class=\"wp-block-heading\">Addendum: How to install RNDIS\/Ethernet Gadget Support?<\/h5>\n\n\n\n<p>When plugged into a&nbsp;<strong>Mac<\/strong>, the Raspberry Pi Zero 2 W with the TorBox mini configuration will be recognised as a RNDIS\/Ethernet Gadget, which you can use like any other network interface (e.g., Ethernet or Wi-Fi). This may take 3-5 minutes because Raspberry Pi OS needs to expand the file system and restart. Under macOS, no additional software is required for installation.<\/p>\n\n\n\n<p>Under <strong>Linux<\/strong>, the <code>g_ether<\/code> driver is needed to use a RNDIS\/Ethernet Gadget. Most likely, the kernel module will be automatically loaded by plugging in the Raspberry Pi&nbsp;Zero&nbsp;2&nbsp;W. If this is not the case, use <code>modprobe g_ether<\/code> to load the module. If successful, <code>usb0<\/code> will be available as a network device, which can be used as every other network device. You can check if the module is loaded with <code>lsmod<\/code> (see also <a href=\"https:\/\/raspberrypi.stackexchange.com\/questions\/124004\/detect-rpi4-as-usb-network-interface-g-ether-dwc2\">here<\/a>).<\/p>\n\n\n\n<p>Under <strong>Windows<\/strong>, a little bit more work is necessary:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Install a RNDIS\/Ethernet driver as explained <a href=\"https:\/\/joe.blog.freemansoft.com\/2022\/11\/installing-rndis-driver-on-windows-11.html\">here<\/a>. If this is not working, try it manually a explained <a href=\"https:\/\/wiki.mod.audio\/wiki\/Troubleshooting_Windows_Connection\">here<\/a>.<\/li>\n\n\n\n<li>Install <a href=\"https:\/\/support.apple.com\/kb\/DL999\">Bonjour for Windows<\/a>.<\/li>\n\n\n\n<li>In Windows&#8217; firewall settings (<code>Settings\\System and Security\\Windows Defender Firewall\\Authorized Apps<\/code>) Windows&#8217; Bonjour service needs the allowance to access public networks.<\/li>\n\n\n\n<li>If the Raspberry Pi Zero 2 W is connected, Windows detects a new, unidentified network without Internet access. Now, the Pi can be accessed using a SSH client (see below).<\/li>\n<\/ul>\n\n\n\n<h1><p style=\"text-align: center;\">\u2022 \u2022 \u2022<\/p><\/h1>\n\n\n\n<h5 class=\"wp-block-heading\" id=\"dhcp\">Addendum: What can I do if DHCP doesn&#8217;t configure my RNDIS\/Ethernet Gadget?<\/h5>\n\n\n\n<p>By default, TorBox mini configures your RNDIS\/Ethernet Gadget interface by using DHCP. If this doesn&#8217;t work, you have to configure RNDIS\/Ethernet Gadget network entries on the client as follows (this is important because using <code>torbox.local <\/code>will not work):<\/p>\n\n\n<div class=\"wp-block-syntaxhighlighter-code \"><pre class=\"brush: plain; title: ; notranslate\" title=\"\">\nIPv4 address: 192.168.44.10\nSubnet mask: 255.255.0.0\nRouter: 192.168.44.1\nDNS-Server: 192.168.44.1\n<\/pre><\/div>\n\n\n<p>Next, log in to your Raspberry Pi\u00a0Zero\u00a02\u00a0W using an SSH client (we recommend using\u00a0<a href=\"https:\/\/www.termius.com\/\" target=\"_blank\" rel=\"noreferrer noopener\">Termius<\/a>) with the following options:<\/p>\n\n\n<div class=\"wp-block-syntaxhighlighter-code \"><pre class=\"brush: plain; title: ; notranslate\" title=\"\">\nAddress: 192.168.44.1\nLogin: torbox\nPassword: CHANGE-IT\n<\/pre><\/div>\n\n\n<p><strong>Important: You must turn off all other network connections on your client machine to avoid interference and ensure all data is routed through the TorBox mini.<\/strong><\/p>\n\n\n\n<h1><p style=\"text-align: center;\">\u2022 \u2022 \u2022<\/p><\/h1>\n\n\n\n<h5 class=\"wp-block-heading\" id=\"unstable\">Addendum: Fix for unstable SSH client connections<\/h5>\n\n\n\n<p>Suppose you encounter installation script issues due to an unstable SSH connection. In that case, we highly recommend installing <code>screen<\/code> so that the installation will continue in the background, even in the case of a connection loss. In such a case, you can log in again with our SSH client and attach <code>screen<\/code> again to see your installation progress.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Installation of screen: <code>sudo apt-get -y install screen<\/code><\/li>\n\n\n\n<li>Log into your Raspberry Pi&nbsp;Zero&nbsp;2&nbsp;W using an SSH client<\/li>\n\n\n\n<li>Start screen: <code>screen<\/code><\/li>\n\n\n\n<li>After losing the SSH connection, the installation will continue in the background. To see the progress, log in again with your SSH client and attach screen again: <code>screen -x<\/code><\/li>\n<\/ul>\n\n\n\n<h1><p style=\"text-align: center;\">\u2022 \u2022 \u2022<\/p><\/h1>\n\n\n\n<h5 class=\"wp-block-heading\">Appreciation<\/h5>\n\n\n\n<p>This project wouldn\u2019t be possible without the tireless support of&nbsp;<a href=\"https:\/\/github.com\/gozillah\">gozillah<\/a>. He also provided a&nbsp;<a href=\"https:\/\/github.com\/radio24\/TorBox\/issues\/264#issuecomment-1934294319\">3D design for an enclosure<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Sometimes, a TorBox on a&nbsp;Raspberry Pi 3 Model B+, a&nbsp;Raspberry Pi 4 Model B,&nbsp;or a&nbsp;Raspberry Pi 5&nbsp;is too big or expensive to use, and a&nbsp;TorBox on a cloud&nbsp;is not a feasible solution. Wouldn&#8217;t it be nice if TorBox were smaller and stealthier? That&#8217;s precisely the aim of the TorBox mini. For TorBox mini, we need &hellip; <a href=\"https:\/\/www.torbox.ch\/?page_id=3544\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;Installation &#8211; TorBox mini&#8221;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_uag_custom_page_level_css":"","footnotes":""},"class_list":["post-3544","page","type-page","status-publish","hentry"],"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false,"post-thumbnail":false},"uagb_author_info":{"display_name":"radio_24","author_link":"https:\/\/www.torbox.ch\/?author=1"},"uagb_comment_info":0,"uagb_excerpt":"Sometimes, a TorBox on a&nbsp;Raspberry Pi 3 Model B+, a&nbsp;Raspberry Pi 4 Model B,&nbsp;or a&nbsp;Raspberry Pi 5&nbsp;is too big or expensive to use, and a&nbsp;TorBox on a cloud&nbsp;is not a feasible solution. Wouldn&#8217;t it be nice if TorBox were smaller and stealthier? That&#8217;s precisely the aim of the TorBox mini. For TorBox mini, we need&hellip;","_links":{"self":[{"href":"https:\/\/www.torbox.ch\/index.php?rest_route=\/wp\/v2\/pages\/3544","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.torbox.ch\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.torbox.ch\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.torbox.ch\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.torbox.ch\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=3544"}],"version-history":[{"count":43,"href":"https:\/\/www.torbox.ch\/index.php?rest_route=\/wp\/v2\/pages\/3544\/revisions"}],"predecessor-version":[{"id":4080,"href":"https:\/\/www.torbox.ch\/index.php?rest_route=\/wp\/v2\/pages\/3544\/revisions\/4080"}],"wp:attachment":[{"href":"https:\/\/www.torbox.ch\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=3544"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}